Year: 2024
Automation Industry
Client: Ceyone Renewable Pvt Ltd, Ahmedabad
1 Side Open · Design · Fabrication
Ceyone Renewable Pvt Ltd
↓Ceyone Renewable Pvt Ltd: Exhibition Stall Design at EngiExpo Ahmedabad, 2024
Client: Ceyone Renewable Pvt Ltd
The back wall was set out as a sequence. Printed panels for solar power and rooftops on the left, an on-grid system diagram in the middle, then blue-edged shelves holding inverters and meters with a screen above. A full-size module stands upright at the open corner and a live control panel sits beside the counter, which is where the energy exhibition booth drops the abstraction. The meeting table sits behind, out of the walking line.
Project Details
2024 · Engi Expo
What We Delivered
Materials Used
Case Study
The Challenge
Solar sells on specifics, and Ceyone had four of them to cover on 18 sqm with a single open side: panels, rooftops, on-grid systems and pumps. EngiExpo runs inside a temporary hangar with high, uneven light, so the exhibition stall design at EngiExpo Ahmedabad needed its own illumination and a clear reading order to the product story.
What We Designed
The back wall was set out as a sequence. Printed panels for solar power and rooftops on the left, an on-grid system diagram in the middle, then blue-edged shelves holding inverters and meters with a screen above. A full-size module stands upright at the open corner and a live control panel sits beside the counter, which is where the energy exhibition booth drops the abstraction. The meeting table sits behind, out of the walking line.
Why It Worked
Engineers stop for hardware, not renders. A real module at the corner and a control panel within reach turned the first question technical straight away. Shelves at standing height let a visitor pick up an inverter without sitting down, and the table behind the counter caught anyone who wanted longer. That sequence is what the exhibition stall design at EngiExpo Ahmedabad was built around.
Inside the Build
The Result
Illuminated brand lettering wrapping the corner fascia
Key Feature
18 sqm
Exhibition Area
3 m
Stall Height
Painted MDF walls
Primary Material
Project Summary
Engineers stop for hardware, not renders. A real module at the corner and a control panel within reach turned the first question technical straight away. Shelves at standing height let a visitor pick up an inverter without sitting down, and the table behind the counter caught anyone who wanted longer. That sequence is what the exhibition stall design at EngiExpo Ahmedabad was built around.
Start Your Project
Planning an exhibition presence that needs to look sharp and perform under pressure?
Share your exhibition brief — stall size, show name, and brand requirements. We respond with a design concept within 72 hours.