Latios exhibition stall design at FITAG Tech Expo Gandhinagar: raised header over a blue gradient bay

Project Details

Two aisles met at this corner of the FITAG hall, and the surrounding stalls were all sitting at much the same fascia height. Latios is a young Indian hardware brand, so name recall mattered more than product detail. The exhibition stall design at FITAG Tech Expo Gandhinagar needed height readable from both faces and a counter long enough to put working machines in visitors' hands.

Materials Used

Two aisles met at this corner of the FITAG hall, and the surrounding stalls were all sitting at much the same fascia height. Latios is a young Indian hardware brand, so name recall mattered more than product detail. The exhibition stall design at FITAG Tech Expo Gandhinagar needed height readable from both faces and a counter long enough to put working machines in visitors' hands.

A cream header box was lifted clear above the stall and carries the wordmark on both open faces, with spotlights washing down across it. Below, the rear wall runs as a single blue-to-violet gradient panel holding the brand story and the OEM partnerships, a screen at its left end. White counters with blue accent fronts wrap two edges of the two-side-open plot, laptops and monitors sit live along them, and the reception counter takes the corner.

Raising the header cleared the neighbouring fascias, so the name was readable from both aisles at once. The counter line then does the rest: machines are out, powered and reachable from the aisle side, so a visitor could stop, try one and talk without committing to stepping in. That open front kept the exhibition stall design at FITAG Tech Expo Gandhinagar easy to enter.